Lcd Screen

Comprehensive​‍​‌‍​‍‌ Technical Support A strong and well-prepared team along with a wide range of services are available for driver development, system adaptation (Linux/Android), and structural design areas, thus enabling quicker and impactful product realization and assisting clients in capturing market opportunities.

This item, P024BFT01-40, features a 2.4-inch TFT LCD panel with a resolution of 240×320 (QVGA) and an RGB vertical stripe pixel layout. The display area is 36.72×48.96mm with a pixel pitch of 0.51×0.153mm, rendering a fine and clear image. Besides a high brightness of 300cd/m² and a contrast ratio of 250:1, it also supports 262K colors, which helps maintain excellent readability even under strong outdoor light.

An LCD Module Printed Circuit Board (PCB) is a highly specialized multilayer circuit board that serves as the electronic interface, signal processor, and power distributor for liquid crystal display (LCD) modules. It transforms raw digital data from a host device (e.g., smartphone SoC, automotive ECU) into precisely timed analog/digital signals that physically actuate the LCD panel’s pixels.

What can we expect from this one? Before this question it is better to know some information about this LCD Touch Panel. If your product requires a size 4.3 inch then our lcd is just what you need. The TFT LCD offers a physical resolution of 800 * 480, clear enough for most scenes to be used. The normal brightness is 280 nits under the test of laboratory.

4.3 inch capacitive touch screen 480*272 g+g 4.3 inch capacitive touch screen gt911 4.3 inch capacitive touch screen

The 3.2-inch capacitive touch screen has product features such as high sensitivity, high response speed, multi-touch, high definition, durability and low power consumption, making it an ideal choice for small electronic devices.

2.8 inch TFT LCD (Thin Film Transistor Liquid Crystal Display) is a small-size display module that uses TFT technology to provide high-quality color images and videos. The‍‌‍‍‌ screen measures 2.8 inches diagonally, with a pixel resolution of 240x320. This results in clear, sharp images with faithful color representation.

This compact little unit measures 42.50×42.50×3.60mm, with a minimal thickness of only 3.6mm. The side-LED backlight ensures the unit remains slim despite integrated touch. It works in extreme temperature ranges from -20℃ to 70℃ for operation and -30℃ to 80℃ for storage. Also, it has successfully undergone testing for temperature extremes, vibration and interference resistance.

This is a high-performance display solution designed for industrial control, smart terminals, and high-end consumer electronics. It features a standard 4.3-inch panel and is powered by the ST7701S driver chip. With a 45-pin standard interface and an 18-bit RGB video interface, it enables high-speed data transmission, achieving a breakthrough in comprehensive performance with ultra-high resolution, full-angle display, and high brightness within a compact size.

This 2.8-inch TFT LCD display features IPS technology and an SPI interface, delivering clear and accurate visuals suitable for a range of applications that require high-quality displays in a compact form factor.

In terms of brightness, the module reaches 200 cd/m², using an LED side-entry backlight solution. The backlight circuit is composed of 4 LEDs in series, with an operating current of 80mA and a voltage of 3.2V, providing uniform and energy-efficient illumination. The module has full-viewing-angle (ALL) characteristics, so regardless of viewing from any angle—up, down, left, or right—the screen's brightness and colors do not noticeably degrade, maintaining a consistent visual experience even in scenarios where multiple people are viewing it.

This Medical LCD Display is a color-active matrix thin-film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. If your product requires a size 2.4 inch then our lcd is just what you need. Improve your product design by adding our 240 * 320 resolution product. QC department measured the luminance is 350 nits under normal operating.